Inner round chainring, for 110mm cranks. These NoQ chainrings are perfectly round whereas Qrings are ovalized (5%).
Rotor Qarbon chainring is a Qrings with a carbon cover. It's allowing a reduced weight and a better stiffness. Combine this product with a classic small Qrings chainring in 110mm.
Made by DeFeet in the USA. They are including reflective arrows integrated in the fiber. This is licensed by DeFeet and also applied for socks. These gloves are compatible with smart phones and tablets, You May use your device without removing your gloves.
To use on a UBB crank (3D+, 3DF, 3D+ aero, 3D Power, 3D Flow, 2Inpower, Inpower) on a BBright, BB386 Evo or PressFit 46/30 frame. Select the standard of your frame in the list.
Available in many sizes. Same quality as the famous Qrings, but round ! Compatible with Rotor 110mm cranks.
In stock in limited quantities. Inventory in real time. You order only what is in stock. Ciamillo GSL micro 2017. Weight: 160g per set (with padholders, without pads). The advantage of the micro cam is to allow a very precise adjustment of the distance rim/pads with just a little hex wrench. A barrel adjuster is still there to offer an adjustment during...
Compatible with Rotor 110mm cranks. Available in 50, 52, 53, 54, 55 or 56T
Improve the aero of your Mixino helmet with this rigid cover. Only for Mixino. Select the size depending on the size of your Mixino helmet.
In stock, shipped out within 24h. Transport through EMS international: Europe 3-4 days, USA/Canda: 5 days, Asia: 7 days, Australia 8-10 days. Super stiff, super compatible (all frames of the market except Trek BB90). The sensor is located into the spindle. It's fully protected. Forged and CNC machined.
The Rotor 3D+ is the best seller of the Rotor line. With an ultra stiff 30mm spindle made in aluminum, it's a product designed for worldclass athletes. UBB, compatible with most of the framesets of the market.
BB86 ceramic bearings are very hard to find for 30mm crank spindles. That's why we have designed this BB that will suit with BB86 frames and Rotor cranks: 3D+, 3D Power, 3D Inpower, 3D Flow, 3D30. The smoothness is unbelievable ! You can expect saving 4 watts at 70 RPM compared with a standard steel BB 41/30.
In stock, shipped out within 24h. Transport through EMS international: Europe 3-4 days, USA/Canda: 5 days, Asia: 7 days, Australia 8-10 days. Rotor 2Inpower is the 2016 Powermeter that is now able to calculate the power on each leg. Super stiff, super light, super compatible (all frames of the market except Trek BB90). The sensor is located into the...
Mono chainring for Cyclo Cross. 110mm spider. Available in 38 or 44T (QCX1) and 46-48-50-52T (QX1).
Rotor 3D24 is a classic 24mm spindle crank. It has exactly the same geometry as all Shimano cranks. Therefore it'll fit any bike with a Shimano BB. No need to change your BB if you already have a Shimano crank mounted on your bike. The 110mm has a classic 5 holes spider. The 130mm has a MAS 5 holes spider and is aero.
To use with a UBB crank and a ITA thread (Colnago, Pinarello..). The wrench of the picture is included.
This 130mm chainring is compatible with Sram BB30 cranks and also with all 130 cranks. You can use a standard QRing for the smallest chainring (see standard 130 section).
Compatible with Rotor 110mm cranks. Take the benefits of a large choice of chainrings with keeping the same 110mm crank. Available in 34,36, 38, 39, 42 and 44T (inner)
Compatible with Rotor 110mm or 130mm cranks depending on the chosen options Available in 34,36,38,39, 50,52,53T
Outer chainring for compact cranks (110mm). Available in many sizes.
Available in black or red anodized !
Qrings are now available for Shimano cranks (4 holes) ! You can adjust your dead point like with the original QRings.
The new Mixino is the latest evolution of Catlike design philosophy. It is the first cycling helmet on incorporate Graphene nanofibers on its inner aramid skeleton. Thanks to the use of this revolutionary material we have created a super light and ventilated helmet.