-€5.00
Rotor Press Fit 41/30
Reduced price:
€39.90
Tax included
These bearings are for Rotor 3D+, Aldhu 3D+, Vegast 30 and a BB86 frame (Shimano Press Fit)
Steel bearings
BB86 Rotor bottom bracket – A key option for 30mm cranksets
If you are planning to install a Rotor crankset, this BB86 bottom bracket is one of the most logical first choices. Designed for optimal compatibility with Rotor 30 mm cranksets, it offers a reliable and affordable solution.
Wide compatibility with PressFit Shimano frames
This bottom bracket is designed for frames using the BB86 standard, with a 41 mm outer diameter. Compatible brands include:
- Canyon: Aeroad, Ultimate, Speedmax
- Scott: Foil, Addict
- Bianchi, Lapierre, BMC, Giant, Wilier (detailed table below)
This standard, also known as PressFit Shimano, is one of the most common on modern road frames. Always double-check that your frame is BB86 before ordering.
An affordable choice for a first build
With its 30 mm inner diameter, this bottom bracket supports all major Rotor cranksets, including:
- Aldhu
- Vegast
- Aldhu Carbon
- Inpower
- 2INpower
While this model offers standard rolling efficiency, it ensures a precise and reliable installation for Rotor 30 mm cranksets. Riders looking for maximum performance may later upgrade to a ceramic solution such as CyclingCeramic.
Why choose this BB86 bottom bracket?
- Very attractive price for an initial setup
- Reliable design, updated and improved in 2022 (blue seals)
- Ideal for riders planning a progressive performance upgrade
Satisfaction-focused alternative: BB86-92 Bikone 41/30 steel
A serious steel alternative within the same BB86 / 30 mm axle philosophy, focused on durability and long-term satisfaction:
- Fully compatible with Rotor 30 mm cranksets
- Clean, silent and reliable PressFit installation
- Excellent value-for-money steel solution
View BB86-92 Bikone 41/30 steel – under €80*
A smart choice if your priority is long-term satisfaction rather than marginal gains.
Velo-Perso.com opinion:
“This BB86 bottom bracket is a perfect solution for a first Rotor installation. If your crankset already represents a significant investment, this affordable option makes total sense. Upgrading later to a ceramic bottom bracket such as CyclingCeramic will further improve rolling efficiency.”
“If your main goal is reliability, silence and peace of mind, the BB86-92 Bikone 41/30 steel is a very coherent alternative in the same BB86 / 30 mm ecosystem.”
Installation advice:
Warning: During installation, make sure that derailleur cables or internal routing parts cannot come into contact with the crank axle. A careful check will prevent friction and premature wear.
Compatibility Table for Rotor Steel 41/30 Bottom Bracket
This table details the compatibility of the Rotor Steel 41/30 bottom bracket with various brands, frames, and cranksets.
| Brands / Frames | Shimano (105 R7000/7100, Ultegra R8000/8100, Dura-Ace 9100/9200) | Rotor Vegast / Aldhu 30mm & Aldhu Carbon | Rotor INpower / 2INpower | SRAM GXP | SRAM DUB |
|---|---|---|---|---|---|
| Canyon: Aeroad, Ultimate, Endurace | ✘ Not Compatible | ✔ Compatible | ✔ Compatible | ✘ Not Compatible | ✘ Not Compatible |
| Scott: Addict, Foil | ✘ Not Compatible | ✔ Compatible | ✔ Compatible | ✘ Not Compatible | ✘ Not Compatible |
| Giant: TCR, Defy, Propel | ✘ Not Compatible | ✔ Compatible | ✔ Compatible | ✘ Not Compatible | ✘ Not Compatible |
| Lapierre: Xelius, Pulsium | ✘ Not Compatible | ✔ Compatible | ✔ Compatible | ✘ Not Compatible | ✘ Not Compatible |
| Bianchi: Oltre, Infinito, Aria | ✘ Not Compatible | ✔ Compatible | ✔ Compatible | ✘ Not Compatible | ✘ Not Compatible |
| Cube: Litening, Agree | ✘ Not Compatible | ✔ Compatible | ✔ Compatible | ✘ Not Compatible | ✘ Not Compatible |
| Ridley: Fenix, Noah | ✘ Not Compatible | ✔ Compatible | ✔ Compatible | ✘ Not Compatible | ✘ Not Compatible |
| BMC: Teammachine, Roadmachine | ✘ Not Compatible | ✔ Compatible | ✔ Compatible | ✘ Not Compatible | ✘ Not Compatible |
| Merida: Scultura, Reacto | ✘ Not Compatible | ✔ Compatible | ✔ Compatible | ✘ Not Compatible | ✘ Not Compatible |
If you have any questions about compatibility, feel free to contact our support team for personalized advice.
| Weight | 80g |
|---|---|
| Axle | 30mm |
| Material | Stainless Steel |
| For Frames: | BB86 |
| Compatible with the following cranks: | Rotor Aldhu 3d+ Vegast, 3d+, Flow, Inpower, Inpower DM, 2Inpower, 2Inpower DM, 3d30 |
| Bearings | Steel |
| Storage location (from where it's shipped to you) | France |
| Manufacturing location | Spain |
Comments (1)
Grade
Shipping
We use a dynamic pricing grid via Packlink. Prices are adjusted in real-time based on weight, delivery address, and chosen service.
Chronopost (Europe)
This is our most reliable carrier if you're looking for a quick delivery. We have daily collections from Chronopost, which is insuring the quickest shipping.
Mondial Relay
The relay point service is available for some EU countries at low rates. It's reliable and economical, you can select your pick up store after entering your delivery address.
USA Deliveries:
We have a flat rate of 34,90€-USD40 with priority mail express. This a reliable express shipping with an average of 7 days of transit.
Asia Deliveries:
We manage these deliveries through the Universal Postal Service (EMS). The shipping cost is €34.90 for most non-European countries. Delivery times are generally between 4 to 12 days.
Returns:
Returns are accepted and are at your expense (unless it is our mistake). Returns must be made within 14 days of receiving your package.
For more details, please visit our shipping page
