Aldhu is the lightest Rotor crank of the History. It combines stiffness and lightweight. You can select spidering type and arm length. This 24mm axle will fit all Shimano BB ! Just remove your Shimano crank and replace by Aldhu 24. We are pleased to ship worldwide this product as it fits in a small package. Shipping costs are displayed at checkout....
In stock, shipped out within 24h. Transport through EMS international: Europe 3-4 days, USA/Canda: 5 days, Asia: 7 days, Australia 8-10 days. Rotor 2Inpower DM is the 2018 update of 2Inpower Powermeter. DM tech is allowing a weight reduction. Super stiff, super light, super compatible (all frames of the market except Trek BB90). The sensor is located into...
This oval spidering is for a directmount on Aldhu arms and spindle. It's available in 4 sizes and this one is with oval chainrings. Pictures are displaying a complete crankset. This product page is for a directmount set of chainrings. Arms and spindle are sold separately.
These NOQ are compatible with 100% of 4 hole Shimano cranks, including 6800/R8000 & 9000/9100. They fit Rotor Aldhu with the Aldhu spider. We recommend the Rotor cover set for Shimano cranks. Inner rings: 34,36,39,42,44T Outer rings: 46,50,52,53,56,58T
Compatible with the following cranks: -3D+ -3D+ 2014 -3DF -3D30 -Flow -3D+ aero -3D Power
These Qrings are compatible with 100% of 4 hole Shimano cranks, including 6800/R8000 & 9000/9100. On Shimano cranks you'll get a better design with mounting the specific bolt set with nice Rotor Shimano crank covers Inner rings: 34,36,39,42,44T Outer rings: 50,52,53,54,55T
This insert will replace the insert of Rotor Garmin mounts. Rotor original part.
510 g for 170 mm / 524 g for 175 mm 167.5, 170, 172 & 175 mm. Forged and CNC, T6 7075 crank arms with trinity drilling. Black sandblasted finish with laser graphics and black axle bolts. Q-Factor 148 mm, Chain line 43,5 mm. Ultra stiff Aluminum 30 mm UBB axle; compatible BSA, ITA, BB86, BB30, BB30 PF, BBRight and BB386 Evo frames. For all 110/130 BCD...
Replacement bolt for Rotor 24mm cranks: 3D, 3D aero, 3D24
Aldhu is the lightest Rotor crank of the History. It combines stiffness and lightweight. You can expect around 80g of weight saving VS a Dura Ace 9100. You can select Rim or Road bike axles, spidering type and arm length. We are pleased to ship worldwide this product as it fits in a small package. Shipping costs are displayed at checkout.
Compatible with all 30mm Rotor cranks (3D+, 3DF, 3D+ aero, 3D Power, 3D Flow, 2Inpower, Inpower, Aldhu 3d+, Vegast) on a BBright, BB386 Evo or PressFit 46/30 frame. Select the standard of your frame in the list.
This part will allow you to lowering or rising the front derailleur.Might be used with 46-48T and 56-58T chainrings
Mount your Garmin on a quality computer mount. Made in aluminum and anodized.
11S chain. Designed for UNO groupset and compatible with all 11S drivetrains. Made by KMC. 253g verified
Compatible with Rotor 110mm or 130mm cranks depending on the chosen options Available in 34,36,38,39, 50,52,53T
Mono chainring for Cyclo Cross. 110mm spider. Available in 38 or 44T (QCX1) and 46-48-50-52T (QX1).
Get an amazing finishing for your Shimano crank with Rotor chainrings. Sold as a complete set of 4 bolts and 4 covers. Weight: 16g per set
Crank arms Rotor Aldhu 24. This product is only compatible with: -Aldhu 24 axle/spindle (color stainless steel): sold separately -Rotor Direct Mount spiders and spiderings: sold separatelyLengths available: 155,165,170,172,5,175mm
The Rotor 3D+ is the best seller of the Rotor line. With an ultra stiff 30mm spindle made in aluminum, it's a product designed for worldclass athletes. UBB, compatible with most of the framesets of the market. Please note: This product may be quite expensive in special lengths. You should consider Aldhu 3d+ with a 5 arm spider: same dimensions, compatible...
This product can be assembled on any 30mm Rotor crank. If you combine this order with a crank, we will mount the spidering directly on your crank.
One spacer for 30mm spindles (Aldhu 3d+, Vegast, 3D+, Flow, 3d30, Inpower, 2Inpower). Original Rotor part. Check your needs and buy the correct sizes.
This chainring is ovalized and will fit: -Aldhu 24 or 30mm -Vegast -2Inpower DM -Inpower DM It's a spidering with single chainring: no need to use a front derailleur.
Features: 30mm spindle 450g (spindle + spider + arms)Includes: Arms, Spindle, Spider, bottom bracket. Not included: chainrings.
Compatible with Rotor 110mm cranks. Take the benefits of a large choice of chainrings with keeping the same 110mm crank. Available in 34,36, 38, 39, 42 and 44T (inner)
This Round spidering is for a directmount on Aldhu arms and spindle. It's available in 3 sizes and this one is with round chainrings. Compatible with Rotor DM cranks: Aldhu 24, Aldhu 3D+, Vegast, Inpower DM and 2Inpower DM
Select your crank arm length. Build your own Aldhu crankset depending on your own needs. Sold as a set of 2 arms of the same length. Spindle is sold separately. Compatible with Aldhu 3d+ axles only.
Vegast is the little brother of Aldhu. It includes forged aluminum arms. All is similar to Aldhu, except arms. You can select Rim or Road bike axles, spidering type and arm length. We are pleased to ship worldwide this product as it fits in a small package. Shipping costs are displayed at checkout.
Compatible with BSA frames and Shimano cranks (105, Ultegra, Dura Ace, all generations). Compatible with Rotor 3d24 and Aldhu 24
Extractor for 3d+ cranks
Bolt only ! The adjuster is sold separately
To use with a UBB crank and a ITA thread (Colnago, Pinarello..). The wrench of the picture is included.
Compatible with Rotor 110mm cranks. Available in 48,50, 52, 53, 54, 55 or 56T
Inpower 3d+ DirectMount is the most affordable powermeter of the Rotor line, and it's including the DirectMount technology. Power is measured on one side (balance is available with 2Inpower). The 30mm axle is ultra stiff and allows to locate the weight into the spindle (better than when moving into arms or pedals) Connect your Garmin or other ANT+ device.
Bolt and adjuster. Compatible with Rotor 3d+ cranks.
Compatible with Rotor 130mm cranks. Available in 39,42, 44 and 46T
Light, ultra stiff and extremely safeThis phenomenally light, ultra stiff and extremely safe stem brakes the age old “weight, functionality or safety “paradigm”. It offers all three in one sleek, technologically advanced package - made possible by our CCC clamping technology. ElegantLasered, black anodized body. Red or black faceplates. Road and MTB...
Compatible with BSA track frames. Requires a Rotor 30mm track axle.
For Road use only. 5 bolts and 5 screws included, total 10 items per set. Picture is what you receive when your order. Please tighten to 7-8nm, we suggest more 8nm.
This axle is compatible with all Shimano BB. You need to add: -Aldhu 24 crank arms -Rotor road spider DM or spiering DM
Available in black or red anodized !
Compatible with Rotor 130mm cranks. Available in 50,52,53,54,55,56 T
Rotor Qarbon chainring is a Qrings with a carbon cover. It's allowing a reduced weight and a better stiffness. Combine this product with a classic small Qrings chainring in 110mm.
Choose your own QXL. QXL is bringing more ovalization to those who are looking for more power. This is the absolute chainring for TT or Ironman. Products displayed on this page are only for 130mm cranks.
135G CNC machined cassette. Designed for Rotor Uno groupset. 11-28 or 11-30 or 11-32
Rotor Uno is available in rim or disc brakes. Price includes: Shifters, rear and front derailleur, cassette, chain, brakes. It's an 11 groupset. Weight: 1655g
This spindle is required to build an Aldhu 3d+ or Vegast crank. Select disc or rim brakes depending on the features of your bike.
This spacer kit will adjust your Aldhu/Vegast spindle length to the BB standard. It's available for road or offset
This 5 arms is allowing you to use 110mm chainrings with Rotor DM cranks: -Aldhu 3d+ / Aldhu24 -Vegast -Inpower & 2Inpower DM
Vegast arms are aluminum part that are forged. They are compatible with Rotor axles and Rotor spiderings/spiders (Directmount technology) Includes: 2 crank arms Sold separately: axle, spider, spidering, bearings
This tool mounts Rotor UBB on frames. It's not sold with Rotor UBB and you'll need it if you mount your BB by yourself. It's also compatible with BSA30 and ITA30 Rotor
144mm spider compatible with Aldhu track axles and Aldhu 3d+ arms.
This axle will allow you to turn your Aldhu 3d+ or Vegast arms into a track crank (need also the 144mm spider).
DM chainring for Aldhu & Vegast Rotor cranks. Also Compatible with Inpower and 2Inpower DM. For 1* drivetrains.
DM chainring for Kapic,Hawk,Raptor Rotor cranks. Also Compatible with Inpower and 2Inpower DM. For 1* drivetrains.
Rotor 2Inpower powermeter for track. Get data from the 2 legs !
To use with a UBB crank (Rotor 3D+, 3D+ aero, 3DF, 3D Flow, 3D Power) and a BB 86 frame (Shimano Press Fit) Compatible with Aldhu/Vegast.
Inner round chainring, for 110mm cranks. These NoQ chainrings are perfectly round whereas Qrings are ovalized (5%).
Last units available !!! Rotor 3D24 is a classic 24mm spindle crank. It has exactly the same geometry as all Shimano cranks. Therefore it'll fit any bike with a Shimano BB. No need to change your BB if you already have a Shimano crank. 110mm : classic 5 hole spider. 130mm : 5 hole aero spider Your length is no longer available ? You can purchase...
Can be used with a UBB crank (Aldhu 3d+, Vegast, 3D+, Flow, 3d30, Inpower/2Inpower) and a BSA Frame Wrench is included.